High Purity Membrane Nitrogen Generator With Screw Air Compressor
Membrane Nitrogen Generator Working Principle
Under a certain pressure, using the large difference of the
diffusion rate between nitrogen and oxygen
from the air in the carbon molecular sieve, a large number of
oxygen is adsorpted by carbon molecular
sieve, while nitrogen is collected in a short time, to achieve
separation of oxygen and nitrogen.
The adsorption capacity of carbon molecular sieve is significantly
different with different
oxygen pressures, reducing the pressure will release oxygen from
carbon molecular sieve, this make
carbon molecular sieve regeneration, then can be used repeatedly.
Using two adsorption towers, one for adsorption and nitrogen
generator, the other for desorption and recycling.
They switch with each other, thus continuous output of high-quality
Environment condition of Membrane Nitrogen Generator
1.installation place: ground grading, without foundation, but it is
necessary to have a sewage discharge
2.The reserved area: about 200m2.
3.Ambient temperature: ≤40°C.
4.Relative humidity: ≤80%.
5.Power:440V/ 380V/220V,60/Hz/ 50Hz
Membrane Nitrogen Generator Specification:
N2 flow rate
N2 outlet pressure
|Gage pressure, adjustable|
N2 outlet dew point
|≤ 45 °C||Atmospheric dew point|
Membrane Nitrogen Generator Details
Required air consumption
PSA Nitrogen Generator
Non-oxygen content in GB